There aren't anti-rattle hitch pins for the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900 because anti-rattle pins are for hollow shank style mounts. There is an anti-rattle bolt on the # D900 mount, but if there is a lot of rattle in the hitch, there is an option to minimize it greatly with a clamp-style option:
- Roadmaster Quiet Hitch for 2" Trailer Hitches # RM-061
The # RM-061 will tighten the ball mount in the hitch and reduce any movement, which is going to... view full answer...
It seems that the person you spoke with is confused. A stabilization strap and an anti-rattle bolt do not serve the same purpose. A stabilization strap helps support the non-trailer load on the hitch, while an anti-rattle bolt helps to eliminate the rattle or wobble of the shank in the trailer hitch.
Per Curt's warranty, the # 18050 stabilization straps need to be used with all non-trailer loads. I spoke with my contact in Curt's technical department who confirmed that the stabilization... view full answer...
There is absolutely an anit-rattle hitch pin for the 24 x 48-3/4 Carpod Cargo Carrier; what you will need is the following part:
- Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232
What this anti-rattle hitch pin - which is also a lock - will do is greatly reduce the amount of rattle and "play" of the shank inside your hitch, so it won't be noisy and you'll have a much more peaceful, quiet ride than a carrier without one. view full answer...
I contacted our representative at CURT and he informed me that the CURT Trailer Hitch Anti-Rattle Kit, part # F-315, has standard 1/2 inch threads.
I have linked an FAQ on Anti-Rattle hitch pins. view full answer...
The Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches part # 63232 does not have a keyed alike option so if multiple are ordered, you could get different sets of keys.
We don't have any options like the above with a keyed alike feature unfortunately. view full answer...
An anti-rattle hitch stabilizer does reduce the noise you hear significantly, but it also helps out your equipment. Less rattling around in the hitch is going to help keep the finish on your hitch and accessories in tact, so your stuff will stay looking new longer. If you're using it with a bike rack, the bikes will also take less of a beating. The anti-rattle stabilizer will need to be removed whenever you remove whatever hitch mounted accessory you have, but could stay on the hitch if... view full answer...
Swagman does not offer replacement keys for their anti-rattle hitch locks. You would need to order a complete new unit. To order the lock you would want part # S64029. view full answer...
I spoke with my contact at Rola and he stated that the Railed Cargo Carrier, # 59507, has a solid shank. You can still use an anti-rattle device with a solid shank accessory. I recommend the No-Rattle Trailer Hitch Wedge, # MPG908. I have included a video review of this anti-rattle device below. view full answer...
The Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 and others with this same design unfortunately do not come with a keyed alike option so you would have to get regular hitch pin locks that can be keyed alike, like the etrailer # e98882 (2-5/8") or # e98881 (3-5/8"), and then use an anti-rattle hitch stabilizer like part # e99007. view full answer...
You are unable to choose the key number of the Hitch Tite Anti-Rattle Hitch Lock for Saris Bike Racks with 1-1/4" and 2" Shanks # SA3022. view full answer...
I recommend using an Anti-Rattle Hitch lock for 2" Hitches like # 63232 to reduce rattling caused by the Ford Brake Light Cover # CR-007F. This anti-rattle hitch lock dramatically reduces any movement or vibration. It is designed for use on hollow-shank ball mounts and accessories. view full answer...
There are a couple different anti-rattle devices available to help reduce the rattle you said you are getting with your hitch on your 2002 Pilot.
One adapter is the Brophy Stabilizer Clamp and U-Bolt, part # RSCP. This uses a U-bolt to slip over the hitch and a plate that holds the ball mount in place in the hitch by tightening the U-bolt.
If you have a hollow ball mount you can use the Anti-Rattle Trailer Hitch Receiver Lock, part # 63232. This uses a spring and block placed inside the... view full answer...
The smallest anti-rattle devices we carry will be designed for a 1-1/4" hitch, like the Roadmaster Quiet Hitch # RM-061-125. We do also have the Curt Trailer Hitch Anti-Rattle Kit for 1-1/4" Trailer Hitches # F-315, but this requires a hollow shank to be used and I think the Roadmaster part does a better job of immobilizing the accessory in the hitch.
With that said, if I am way off the mark on what you are asking about, let me know and I can try again. view full answer...
The Swagman XC-Extended Platform-Style 2 Recumbent Bike Rack # S64650-EXT includes an anti-rattle bolt but this can be replaced with the optional anti-rattle lock part # S64029 which serves as both an anti-rattle device and a hitch lock to secure the rack.
Yes, we are able to ship Swagman products to Canadian addresses. view full answer...
The # HRLHPTC we offer is our part number for the Hollywood Racks LHPTC. It is the same exact item.
The hitch lock offered with the # HRLHPTC is indeed an anti-rattle lock, as indicated by the threaded portion of the hitch bolt. The threaded portion is designed to engage a threaded nut or sleeve inside the shank of certain Hollywood Racks hitch mounted bike racks. When the threaded bolt is drawn down, it pulls the shank of the bike rack tightly up against the inside of the receiver tube... view full answer...
I can understand your skepticism based on your previous experience with a threaded hitch pin, but I can tell you that I have not heard of any general reliability options with the use of threaded hitch pins in general or specifically with the use of the etrailer Motorcycle Carrier with Ramp for 2" Hitches # e98873.
The same holds true of the lock for this carrier, the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers for 2" Hitches # e99047.
I am completely confident that... view full answer...
We sure do have the part you are looking for.
The Saris Cable lock And Anti-Rattle hitch Lock is part # SA984. This kit helps secure the carrier to the trailer hitch and also the bikes to the carrier. view full answer...
We do not actually do any tests of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K # C83WR because we do not manufacture the item, it is simply a product we offer for sale. As for your other questions, the core is made of polyurethane; there is not a specific amount of time it is expected to last; and it will do just as well in cold weather as it does warm weather.
In regard to the anit-rattle # e99007, it can be used but is not at all necessary... view full answer...
The hinge pin you are talking about on the Carpod Walled, Folding Cargo Carrier, part # M2205-01-02 is a 5/8-inch diameter pin.
I called my contact at Carpod and they siad it is really solid and an anti-rattle pin is really not needed. The hitch pin and clip to use on the trailer hitch receiver is not included. For a standard pin and clip you can use part # PC3 and for a locking anti-rattle hitch pin you can use part # 63232. view full answer...
The Anti-Rattle Hitch Pin for 2" Trailer Hitches part # SHP2061 doesn't have a weight rating provided by Let's Go Aero. However, its a 5/8" bolt so you can estimate it to be between 70,000 and 90,000 lbs. view full answer...
Go To Results